OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen
OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen Detail:
Features:
Huyssen Power Supply 12V12.5A
AC input 110/220VAC
Low leakage current <2mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by air
Withstand 300vac surge input for 5 second
Conformal coated
LED indicator for power on
Low cost, high reliability
100% full load burn-in test
2 years warranty
Specifications:
|
Model |
LRS-150-5 |
LRS-150-12 |
LRS-150-15 |
LRS-150-24 |
LRS-150-36 |
LRS-150-48 |
|
|
output |
DC voltage |
5V |
12V |
15V |
24V |
36V |
48V |
| Rated current |
20A |
12.5A |
10A |
6.5A |
4.3A |
3.3A |
|
| Current range |
0~20A |
0~12.5A |
0~10A |
0~6.5A |
0~4.3A |
0~3.3A |
|
| Rated power |
120W |
150W |
150W |
156W |
154.8W |
158.4W |
|
| Ripple&noise |
120mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
200mVp-p |
200mVp-p |
|
| DC voltage ADJ. range |
±10% |
±10% |
±10% |
±10% |
±10% |
±10% |
|
| Voltage tolerance Note.3 |
±3% |
±2% |
±1% |
±1% |
±1% |
±1% |
|
| Line regulation Note.4 |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
| Load regulation Note.5 |
±2% |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
| Setup,rise,hold up time | 800ms,30ms,40ms/230VAC(full load) | ||||||
| input | Voltage range | 90~132VAC/170~264VAC(selected by switch),240~373VDC | |||||
| Frequency range | 47~63HZ | ||||||
| AC current | 2.8A/115VAC 1.6A/230VAC | ||||||
| Inrush current | Cold start 50A/230VAC | ||||||
| Efficiency |
80% |
83% |
85% |
86% |
88% | 90% | |
| Leakage current | <0.75mA/240VAC | ||||||
| protection | overload | Rated output power110%~150% start over load protection | |||||
| protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| Over voltage | Rated output voltage 115%~135% Start over voltage protection | ||||||
| Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| Over temperature | 100℃±10℃(RT1 detect beside transformer) | ||||||
| Protection type:cut off the output,auto-recovery after the temperature become normal | |||||||
| environment | Working temp,humidity | -30℃~+70℃(Please refer to“derating curve”) 20%~90%RH Non-condensing |
|||||
| Storage temp,humidity | -40℃~+85℃,10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | ||||||
| safety | Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC | |||||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | ||||||
| Fit standard | Safety standards | Compliance to UL60950-1,TUV EN60950-1,GB4943 | |||||
| EMC emission | Compliance to EN55022(CISPR22)Class A,GB9254 Class B,EN55014,EN61000-3-2,3 | ||||||
| EMC immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1 | ||||||
| others | Dimension | 159*97*30mm(L*W*H) | |||||
| Weight/packing | 0.43kg/30pcs/13.9kg/0.023m³/0.82CUFT | ||||||
| MTBF | ≥580K hrs min. MIL-HDBK-217F(25℃) | ||||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 0% to 100% rated load 6.The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft) 7.The power supply is considered as a component which will be installed into a finalequipment.The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests. |
||||||
Related products:
Applications:
Widely used in : Billboards, LED Lighting ,Display screen, 3D Printer, CCTV camera, Laptop, Audio ,Telecommunication ,STB , Intelligent robot, Industrial control, equipment, etc.
Production Process
Applications for power supply
Packing & Delivery
Certifications
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen , The product will supply to all over the world, such as: India, Bhutan, Ecuador, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Brook from Plymouth - 2017.08.18 18:38
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Johnny from Qatar - 2018.06.09 12:42
Products categories
-
Manufacturer of 5v 4a Charger - Detachable 45W...
-
2021 High quality Adaptor 12v - 12V 5A Power S...
-
PriceList for 24v 40a Power Supply - Adjustabl...
-
Popular Design for 15v 4a Power Supply - Small...
-
Manufacturing Companies for Cheap Portable Char...
-
18 Years Factory 24 Volt Power Supply - High P...